Skip to content

Corrosive Pool

Poison · Volume 2

A goo pool spreads on the hit surface with bubbles that swell and pop, is eaten away into holes, and gives off fumes.

Use: Poison puddles, acid ground hazards, damage-over-time zones.

Left to right: Original, Overdrive, Chaos, Bold / step 6 (labelled on the pedestals). All four fire together and loop at 60 FPS.
  • Asset: NS_SP_CorrosivePool
  • Shipped path: /Game/VoxelHitEffects/Vol02/Systems/Poison/NS_SP_CorrosivePool
  • Presentation: Original system with three additional parameter presets.

Values are extracted from the shipped system and grouped by what they control. Colours are linear RGBA (the swatch shows the display colour); vectors list X, Y and Z. Restart the effect after editing, particularly counts and seed values.

ColorLinear RGBA
DefaultR 0.42 · G 1 · B 0.08
Main colour of the effect.
IntensityFloat
Default1.6Range0–25
Global emissive multiplier.
ResidualColorLinear RGBA
DefaultR 0.22 · G 0.42 · B 0.08
Colour of the debris that lingers after the hit. Requires ResidualCount > 0.
SecondaryColorLinear RGBA
DefaultR 0.85 · G 1 · B 0.4
Hot highlight colour: core, rims, tips and glints.
CoreCountInt
Default40Range0–400
Voxels in the goo splat. 0 turns this layer off. Restart after editing.
CoreDurationFloat
Default0.35Range0.02–5
Lifetime of the goo splat, seconds. Cannot extend the effect beyond its total Duration.
CoreSizeFloat
Default16Range0–100
Radius of the goo splat, cm before Size.
GridSizeFloat
Default1.5Range0–20
Centimetres. Snaps voxel positions to a world grid for the stepped voxel look; 0 disables snapping.
ImpactDirectionVector3
DefaultX 0 · Y 0 · Z 1
Surface normal / hit direction in world space. The flat parts of the effect face along it; upright parts stay world-up. Zero falls back to +Z.
ImpactPunchFloat
Default0.3Range0–2
Overshoot of the core at impact; 0 = none, 1 = very punchy.
SizeFloat
Default1Range0.1–5
Global scale multiplier for positions and voxel sizes.
VoxelSizeFloat
Default3.4Range0.5–30
Voxel size of the core flash, cm before Size.
ResidualCountInt
Default40Range0–200
Voxels in the toxic fumes. 0 turns this layer off. Restart after editing.
ResidualDelayFloat
Default0.3Range0–3
Delay after the hit before the toxic fumes are released, seconds (randomised +-20%). Requires ResidualCount > 0.
ResidualDurationFloat
Default1.2Range0.02–5
Lifetime of the toxic fumes, seconds. Requires ResidualCount > 0. Cannot extend the effect beyond its total Duration.
ResidualSizeFloat
Default3.6Range0–40
Voxel size of the toxic fumes, cm before Size. Requires ResidualCount > 0.
ResidualSpeedFloat
Default45Range0–600
Speed of the toxic fumes, cm/s. Requires ResidualCount > 0.
ShapeCountInt
Default320Range0–1200
Voxels in the goo pool. 0 turns this layer off. Restart after editing.
ShapeDelayFloat
Default0Range0–3
Delay after the hit before the goo pool start, seconds.
ShapeDurationFloat
Default1.8Range0.02–5
Lifetime of the goo pool, seconds. Cannot extend the effect beyond its total Duration.
ShapeRadiusFloat
Default55Range0–200
Radius of the goo pool (the bubbles sit on it), cm before Size.
ShapeThicknessFloat
Default3.2Range0.5–20
Voxel size of the goo pool, cm before Size.
SpikeCountInt
Default9Range0–48
Number of bubbles (each is SpikeLength voxels). 0 turns them off. Restart after editing.
SpikeDelayFloat
Default0.1Range0–3
Delay after the hit before the bubbles start, seconds.
SpikeDurationFloat
Default1.5Range0.02–5
Lifetime of the bubbles, seconds. Cannot extend the effect beyond its total Duration.
SpikeLengthInt
Default16Range1–32
Voxels in each of the bubbles. Restart after editing.
SpikeSizeFloat
Default2.4Range0–40
Voxel size of the bubbles, cm before Size.
AnimationFrameStepInt
Default1Range1–12
Animation step. 1 = smooth; N > 1 holds each pose for N frames at 60 Hz (3 = 20 poses per second, 6 = 10). Duration and cleanup are unchanged.
AnticipationTimeFloat
Default0.05Range0–1
Seconds of build-up before every impact layer starts; zero hits instantly.
DurationFloat
Default2Range0.1–5
Total seconds including the anticipation; also the particle lifetime. Restart after editing.
BurstRotationVariationFloat
Default15Range0–180
Random burst yaw in degrees when Randomize is on.
RandomSeedInt
Default41Range0–99999
Fixed seed for a repeatable result; 0 = new layout every play.
RandomizationStrengthFloat
Default1Range0–1
Blend between the authored look (0) and full randomization (1).
RandomizeBool
DefaultOff
Enable per-play randomization of spread, rotation and voxel size.
SpreadVariationFloat
Default0.15Range0–0.9
Random spread range when Randomize is on.
VoxelSizeVariationFloat
Default0.15Range0–0.9
Random voxel size range when Randomize is on.

“No limit” means no bound was recorded in the asset metadata; it is not a recommended operating range. Begin with the shipped values. See units and editing, stepping, and layer lifetime caps.

These are four instances of this system. Unlisted controls inherit their asset defaults. All three additional presets are parameter variations, not additional system assets. Colours are listed as linear R / G / B.

ParameterOriginalOverdriveChaosBold / step 6
RandomSeed4141041
AnimationFrameStep1126
Size11.251.051.12
ImpactDirectionX -1 · Y 0 · Z 0.2X -1 · Y 0 · Z 0.2X -1 · Y 0 · Z 0.2X -1 · Y 0 · Z 0.2
ShapeCountInherited400InheritedInherited
SpikeSizeInherited1.92Inherited2.88
SpikeCountInherited18InheritedInherited
ResidualCountInherited80InheritedInherited
ResidualSizeInherited2.88Inherited4.32
CoreCountInherited80InheritedInherited
VoxelSizeInherited2.72Inherited4.08
ResidualSpeedInherited67.5InheritedInherited
IntensityInherited2.24Inherited1.792
RandomizationStrengthInheritedInherited1Inherited
SpreadVariationInheritedInherited0.7Inherited
VoxelSizeVariationInheritedInherited0.7Inherited
BurstRotationVariationInheritedInherited180Inherited
RandomizeInheritedInheritedOnInherited
ShapeThicknessInheritedInheritedInherited3.84
GridSizeInheritedInheritedInherited3.9

Back to catalog · Spawn in Blueprint · Orientation · Randomization